Search

Product HighlightsNi-MH batteries High Capacity: max. 3000mAh, min.2850mAh No memory effect: can be recharged when fully, or partially discharged Maintains up to 80% of the initial charge up to 1 year (when not in use and stored correctly) Recharge up to 1000 times before reaching 80% capaci..

HighlightsFixed 5500K LED lightRough & Fine Dimming Modes8-Channel IR Remote ControlCan be operated with a downloadable mobile phone RC AppPower with Sony NP-F Series Batteries (not included)OverviewThe YN300 III on-camera LED light panel from Yongnuo is a lightweight unit with a 5500K light out..

OverviewThis is a 150W modeling lamp for use with select Godox studio lights as a spare or replacement for the lamp that comes with each head. They include Godox SK300II, SK400II, and MS300 flash heads, among others. It is white-colored with a long form factor and installs quickly and easily via its..

Product HighlightsBattery Type: Lithium-IonBattery Voltage: 7.4VBattery Capacity: 2900mAhOverviewCompatible with: Sony NP-F330 NP-F530 NP-F550 NP-F570 NP-F750 NP-F770 NP-F780EXP NP-F950 NP-F960 NP-F970 NP-F980 NP-F980PRO NP-F980EXP NP-F990 Batteries, Sony L Camcorders, Sony Cyber-shot Cameras, LED V..

Product HighlightsDesigned for AF-P DX NIKKOR 70-300mm LensesPrevents stray light from getting into the lensProtects the lens from impactOverviewThe dedicated Nikon HB-77 Lens Hood is specifically designed for use with the and AF-P DX NIKKOR 70-300mm f/4.5-6.3G ED and AF-P DX NIKKOR 70-300mm Lenses...

HighlightsBi-Color 96-LED LightDimmable 3200 to 5500K OutputAdjust Brightness Without Changing ColorSlim, Lightweight DesignPower with Sony NP-F Series BatteriesOverviewThe YN300 AIR Bi-Color on-camera LED light panel from Yongnuo is a lightweight, slim light that can be mounted on a camcorder or DS..

Nikon HB-58 OverviewImprove visibility and reduce flare with the dedicated Nikon HB-58 Bayonet Lens Hood for the AF-S DX NIKKOR 18-300mm f/3.5-5.6G ED VR lens. The petal-like design provides enough coverage to block stray light from entering the lens, while preventing the hood from showing up ..

Product HighlightsModel: VL-300 Power Output: 300W Output Control Range: Full to 1/32 Stepless Recycling Time to Full 220V-240V/50Hz: 0.6~2.0s Flash Duration: 1/800th~1/1200th Modelling Lamp Output: 75W Triggering Method: Slave Sensor/Sync Cable/Test Button Color Temperature: 5600°K±200°K..

Product HighlightsSize:12"x15"Fast and Easy MountingRemovable Front Diffuser40 Degrees GridCarry CaseOverviewThe Aputure Softbox for P300c LED Panel easily slips into your light and is used to soften your the bright LEDs.The softbox also has a grid included.In the BoxAputure Softbox for P300cLED Pan..

Canon ET-65B OverviewThis ET-65B Lens Hood from Canon is primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. Since the end of the lens is extended, you get the added benefit of some extra protection from accidental impact. This hood..

Product HighlightsFlash Ring Bulb as spare or replacement Compatible with Godox SK300II and SK400II Working Voltage 110V-220V Can be installed by the userOverview of GODOX SK300II/400II Replacement Bulb The Godox 400Ws bulb is a spare or replacement flash tube for use with the SK400II or..

Product HighlightsFlash Ring Bulb as spare or replacement Compatible with Godox MS300 and MS200 Working Voltage 110V-220V Can be installed by the userOverview of GODOX SK300II/400II Replacement Bulb This is a replacement Flash Tube for use with Godox MS series of light. The tube has..